Search results

As far as I can tell the E70 velvet doesn't use a current to voltage stage like the ESS chip version. It uses the AK4191 chip with the 4499EX

If you look back through this thread there have been a few comments about popping sound when using xlr outputs. Are you able to try with rca and see if it happens from that output. May be an issue with the xlr's.

The DO 100 is a relatively new DAC, how did it die?

Was looking at a few sites tonight and noticed that prices of these 2 dacs and their matching head amps have remained at the 11.11 sale price. E50 - $199 D30pro- $299 Does anyone know if Topping are discontinuing these models with the release of the E70? The E50 seems a bargain for a really...

Really? I've found that dacs that measure almost identically can actually sound quite different. Take the Toppin E50 and the Topping DX3 Pro+. They sound quite different yet measure almost exactly the same.

What DT770 do you have, if chu has more bass I'd say your dt770 is not being driven with enough power

Do people really think that different IEMs and headphones that have the same frequency response measurements sound exactly the same? That's like saying 2 cars that have the same engine specs drive the same...

Tried these but found the nozzle too long and therefore uncomfortable for me. Sound was good but not the most natural sounding and technically not as good as some other iems.

I'm trying to understand why anyone on this site would want to buy this all in one for $700. Apparently measurements are everything so why would you buy this over the DX3pro+. They measure within a few percent of each other with the differences out of the audible range, so should therefore be...

The Topping dx3 pro+ and I'm pretty sure the dx5 have this feature. A button on the remote can switch between Headphone only, dac only or dac and Headphone out simultaneously controlled by the volume button.

I'm pretty sure the failure rates on certain models has been huge. Thinking PA5, D30pro and A30pro here.

Have sent 2 emails in the last 5 days and am yet to hear back. This issue started immediately in the product life of a few of their dacs. It was to do with changing from an AKM receiver to a cirrus logic receiver. They no longer mention which receiver they are using. Considering how long...

Have tried 3 different coaxial cables, reversed the cables and all have drop outs. Pain because I have a really decent coaxial cable that I can't use now.

Have been using optical tonight and so far so good, no drop outs. Coaxial is still a disaster.

The audio trim feature in the node is off, Thanks.

Will try later today after I pick up an optical cable.

Last time I contacted Topping about this issue on my D30pro, the response was they are UNABLE to fix the issue, so I don't think I'll bother with that again. The assured me the issue was resolved on the E50 but I guess not.

Have been happily using my Topping E50 dac between Bluesound node and amp via coaxial cable for a few months until the last few days. Out of nowhere, it's now having the drop outs that plagued the D30pro, E30 and D50s. I've tested the node and same cable with my other dacs and there are no...

Looking at all recent releases Topping releases apart from the A90D, thinking Dx3pro+, dx5, g5, nx7 the NFCA module being used appears to be roughly the same power output and specs. Also not balanced and any small differences come from the dac implementation. I'm wondering if the Dx7 pro+ uses...

Have you read the PA5 thread on this forum, or the D30pro thread etc. So many issues among so few people is a cause for concern IMHO