Search results

For Aeon Closed X which has the dip in 1-2k instead of 3k Preamp: -5.5 dB Filter: ON LS Fc 30 Hz Gain 3.5 dB Q 0.6559 Filter: ON PK Fc 153 Hz Gain 2 dB Q 4 Filter: ON PK Fc 143 Hz Gain 1 dB Q 5 Filter: ON PK Fc 290 Hz Gain -0.5 dB Q 2 Filter: ON HS 12 dB Fc 900 Hz Gain 10 dB Filter: ON HS 12 dB...

thats not a bad weight for what they are!! I myself get a pain on my head if I use anything other than light all plastic sennheisers or specificaly the hyperx cloud ii headset for something heavier (even the cloud alpha which is barely different bothers me) so for most people they should be...

Whats the weight of these?

Glad I could help! Also got lucky that despite not matching them all at 500hz in that first chart, the information still ended up fairly useful since its was just a volume offset. No need to pay me lol, but if you happen to like the same games that I do, I have a patreon for all the random mods...

no its not internally balanced, so thats why the power is half

Omg I spotted the Tb3 black manta next to the cables o_O

Oh right I should mention, now that I actually have these headphones, firefly is totally correct about the high frequncys, especially since with this headphone these is more variance depending on where my ear is inside the cup vs anything else Ive used, so id ignore everything past 3KHz. Taking...

Gonna buy this for high frequency antenna testing, will write off the cost to the grant people. Surely not just gonna sell the copper

Hey can someone measure the voltage across the led? Trying to figure out why my burnt out

oof the on led died on mine, now im gonna accidentally leave it on even more often

Yeah couldn't find a lot of details on those at the time, dunno if its changed since

oh so I found out that it parely makes a difference in spl, and it turns out I have been making a mistake that cause me to get a seriosly overpowered amp. now im just running on low gain with the knob near max for sweet spot sinad, unless that makes it take more power on the amp side and run...

sorry 0.75-1 ish forgot to compensate for being 13 ohms idk why i switched to a theoretical example for easy numbers when comparing to what I actually have

oh yeah I actually work with electronics, just confused about where the mV for spl comes from, since it seems way too low to take less then a volt, since 1 volt into 100 ohms, would be only 10 mW, yet I run my amp at 1/2-3/4 with my dac at -11 dB, (50 in windows) so my amp is at like 1.5-2.25W...

well I trust these measurements with my life, it seems very inconsitant wil other ones I've seen. Perhaps having few models for many years and internationally they used different stuff from one to another? either that or qc is bad but no one noticed bc the build quality is good. Certainly dont...

would be the valid choice then for the op since the hd800 is way cheaper if I remember correctly

Theres a mod to change the hd 800 into the hd 800 s right?

I realise my last comments was full of spelling mistakes and confusing bc I was probably doing something else at the same time. TL:DR pads only are there to make them not leak all the bass, they are basically on ear and many don't have foam between the driver and your ear anbd are pretty...

coming back becaused I realised that said 700 mV not 700 mW, and now I'm quite confused when trying to teach someone else how the calculations work.

yeah I ended up buying it from apos when they had it on sale for 118 with free shipping to canada just like on amazon.ca where it was the equal in canadian. A place like that will probably have good customer service if anything ever happens