Search results

Wow, they only needed to provide a HiFi edition with a wider radiating pattern baffle/waveguide and most speakers were obsolete.

No concrete prevents resonances, every enclosure has them and only damping helps. A resonant enclosure is another thing. However, the issue is the internal modes most of the time which will leave the box in some way, be it through the woofer cone, or by influencing the woofer response.

yes, it could become a complication that piCorePlayer is running on TinyCore Linux, let’s see if it can be made working. This is the pCP implementation of CamillaDSP. Development thread...

Thank you very much for the conclusive answer and also for sharing your work! This tool will complete my streaming setup. I will order the dial / knob tomorrow and begin with setting up Jesper’s (user lykkedk over at diyaudio) “SuperPlayer,” a CamillaDSP enabled piCorePlayer in the meantime. And...

Have you shared your script, @MarcosCh, and if not, would you? I would really like to use the tone control functionality. I have not read any details how this was implemented, did I miss this? Is it a proper tone curve?

It was clear almost from the beginning, after reading a couple of posts, that another chatbot had joined the forum. This time not a questioning one, but one that is fixed to a single expression.

Whilst interesting, this does not belong in the speaker review section.

There will most probably be a difference how KH310 and KH150 image, if we assume the latter shares the same topology with KH80: https://www.audiosciencereview.com/forum/index.php?threads/genelec-8341a-vs-neumann-kh80dsp-vs-kh310a-impressions-and-in-room-measurements.23034/ Also, in the S360...

The very nice situation in which you are in is that you want to listen to the speakers from a true mid-field distance. The listening position 4 meters from the speakers comes as a great bonus in my opinion, when considering the S360. Their output cabability of the S360 is extremely high, you...

Genelec S360 and all you need is a streamer.

What is the source and have you tried to use EQ?

Because it is not a requirement for home listening in HiFi role, is it that hard to get? If one simply wants the 20-20k bandwidth while listening to a favorite album, there is no need for two. Again: Neumann is advertising a tool for music production. There is benefits with multi sub setups for...

Wow, what speakers?

Would you switch them off after you finished your listening session? If not: Hiss is probably audible at LP (only listened to 8030As), when no program material is running. Then, you would switch them off with a remote. If you do not want to pay attention to this, you might consider a passive...

Omg, this is so ridiculous. Sell them and give us a rest.

If you find that annoying how about selling the speakers? This is not an audio interface thread, please move somewhere else for this.

If you knew the other computer would not have an issue at its USB ports ... Why you also needed to have another interface at hand that does not make a popping sound, at which point things where already quite clear. Please do your research first and not obliterate this speaker review thread with...

This is quite obvious and why I recommend you to go to a hardware shop. If the volume is not very high, its a sound among others that is played on the speakers. The voltage bump transmitted via the USB signal will probably not damage the 8030C. Speaking of which, we might return to discuss this...

You should definitely do this because this is not a personal PC troubleshooting thread and after I told you your motherboard features an extension slot which could both be used for either another USB-board or an internal PCI-express sound interface like the ESI Maya 44 and you did not...

You should probably visit a local hardware store, if you cannot identify that your motherboard supports 1x PCIe-card from HP’s technical information. Ask someone who is a professional to solve the issue for you and bring them your hardware.