Search results

Thanks for your reply ) In all projects involving the Heil ESS AMT 2/3, everyone recommends a mounting in a not sealed enclosure... I only refer to the Heil ESS AMT Tweeter. Regarding other dipole transducers, I don't know ) I misspoke in my previous post. )))) Check here, the best Project...

I did not designed the Keramix kit )) This is not a diy kit... this is a German brand )

Thanks for the feedback...not sure what project you're talking about ? ADS project 1 . ADS Project 2 or the Keramix speakers ? To give you some food for thought. The ADS 2 project fixed some notable flaws of the first project. On the ADS 2 project, the ESS dipole transducer is contained in a...

Thanks for the clarification. I imagine that theoretically, you are right. However, you can not combine the Heil AMT with any Woofers and it is more summarily what I should have said)

Thanks for the link. This kit Seems interesting. Why don't you get the ADS kit instead if you want to move towards an AMT project? On the other hand, if you are looking for something similar to the "Bordeaux kit", I strongly recommend these speakers, based on two Accuton Woofers and an...

Thnks I think the Heil AMTs deserve better than the Dayton RS225s... You have to keep in mind that the Heil AMTs are fast transducers and you really need Woofers capable of harmonizing and following... The Dayton measures well, in my humble opinion, you have to crossover between 1500HZ and...

If I were you I would keep them )) Immerse yourself in a DIY project and you will see that you can take advantage of these magnificent tweeters ) BTW : I went to listen to some Wilson Benesh speakers in an auditorium and I didn't have the same emotions as with my ESSentials... which really...

I have been a drummer for several years, I have always been very sensitive to the transcription of cymbals, and in particular of "chabada" with ride in the most faithful Jazz register. The only transducers that made me forget that I had a speaker in front = Heil AMT 3 I also imagine that the...

The last AMT 3 are better than their predecessor. The secret with these Heil Tweeters is that you have to combine them with fast woofers. )) The ADS ESSentielle kit has been the subject of numerous tests with a lot of loudspeakers, the MHP during the design spent almost two years testing the...

As far as I know they are Dipolar. ))) I've tested tons of loudspeakers and very, very expensive ones.... I've never found a tweeter as pleasant, as natural and transparent as the Heil AMT 3, a real treat for this transducer! Check measurements here for the last version (V3) ...

About the Papyrus version issue around 1200HZ, so you can compare : The Textreme is better till 2KHZ. A full review with great measurements here : https://audioxpress.com/article/test-bench-sb-acoustics-satori-mw16tx-8-textreme-woofer Satori Papyrus : Satori Extreme :

I can ) I know it is a dipolar tweeter) In both project, the rear panel is open for the AMT )

Hi, Many thanks. The crossover was developed by Hervé Breton of MHP Toulouse (France). Unfortunately, the diagram is not public and he asked me to respect his wishes.... The AMT Tweeter part is based on an SMD type Crossover with gain compensation ((0DB / -1.5DB / -2.5DB / -4DB) first order @...

Some other pictures :

Hi amigos, Would like to share some pictures and spec of my brand new Satori Textreme / Great Heil AMT 3 diy project. In this adventure, I remained on an eco-responsible perspective by working in particular with my favorite local carpenter Anthony who was in charge of the selection of the wood...

AudioLab Measurements show excellent results with the proto version. I think it's more than enough to get an idea of the final version which can only be improved) The Benchmark is also twice as expensive as the Soncoz With fairly comparable performance...

Another alternative that could be considered : https://www.l7audiolab.com/f/soncoz-sgp-1/ You have the best of both world ) Class AB with generous Power https://www.soncoz.com/product-item-7.html

Without wanting to bring the subject back on the carpet: https://audioxpress.com/article/test-bench-sb-acoustics-satori-mw16tx-8-textreme-woofer "eXtreme diaphragms are definitely finding acceptance among loudspeaker manufacturers over the last several years. In the two-channel high-end market...

Hi, I bought it from Mouser I have 4 Op amps 2210 Soic8 Op amps in stock ) But you need to solder it in DIP8 socket like this Adapter SOIC8 > DIP8 (round pins) ...

Seems that Perlisten is using some Satori woofers I own some ADS French speakers with the Great Heil ESS AMT3 / Satori Egyptian Papyrus woofers = splendid to listen to, absolutely sensational timbres Checkout my project : https://www.homecinema-fr.com/forum/post181052902.html#p181052902