Search results

  1. hemiutut

    REW+APO can't see the results but its working

    Normal that it sounds bad when raising that valley of 115 Hz with + 11 dB. Equalizing is not raising or lowering a specific frequency, but you don't have to be afraid to get down to it. You will see that looking for information is very easy. For now, I advise you not to raise the valleys you may...
  2. hemiutut

    REW+APO can't see the results but its working

    Thank you My suggestion is to do more APO targets and see which EQ you like best. I suggest you do a test by taking the 85 dB reference and equalizing it down. Try this EQ up to 3 kHz for now, measure again with APO and do another EQ on the result Take the test. You will see that the Individual...
  3. hemiutut

    REW+APO can't see the results but its working

    The acoustic measurements are very good in my opinion. To enjoy the team-room
  4. hemiutut

    REW+APO can't see the results but its working

    Thanks for the .mdat file It is clearly seen that it has acoustic treatment in the room. Can you comment on your acoustic treatment? Greetings
  5. hemiutut

    REW+APO can't see the results but its working

    Or upload it to Drive for example?.
  6. hemiutut

    REW+APO can't see the results but its working

    Thank you Can you put the .mdat file?
  7. hemiutut

    REW+APO can't see the results but its working

    If you can already measure with APO, it would be nice if you can put the .mdat file to see what you had before vs APO.
  8. hemiutut

    REW+APO can't see the results but its working

    To measure with APO and see it with REW, you have to put the java drivers.
  9. hemiutut

    Rear height placement to work with Auro 3D and Atmos

    If that video is bad advice, you can tell him on his YouTube channel since here he surely won't be able to refute it. Greetings
  10. hemiutut

    Room treatment advice

    Can you put the REW .mdat file without vs acoustic treatment? 10 cm thick panels is inappropriate to control the lower and higher frequencies in the locations they are placed. Besides, the resistivity to the flow of the air passage in its panels is very high. It is not the most recommended...
  11. hemiutut

    EQ Software for Windows, Linux, macOS, iOS/iPadOS and Android.

    Thank you for the courtesy in responding. About the IR and FIR filters I don't want to disagree in this thread, I can simply say that I have done 2 equalizations: The EQ in each channel with graphic filters has from 100 to 120 filters and the one made with parametrics in my case only has 12...
  12. hemiutut

    EQ Software for Windows, Linux, macOS, iOS/iPadOS and Android.

    I already have it clear, thanks. What surprises me is that you say that with parametric filters you do not get such a precise and good sound. Do the PEQs that your program applies in the mid-high zone have a fairly narrow Q? I use PEQS and I never use a narrow Q in mid-high. I hope you...
  13. hemiutut

    EQ Software for Windows, Linux, macOS, iOS/iPadOS and Android.

    So, as you can see in the capture that I have posted of the equalization, are they only graphic filters or are there also mixed parametric ones? I see that it says for example: GraphicEQ and hence my confusion: I give an example of the first filter of the Channel L 19.611011505127...
  14. hemiutut

    EQ Software for Windows, Linux, macOS, iOS/iPadOS and Android.

    Edited: Thanks for putting the 2 links. I use the Pc + Equalizer APO ( REW + Umik-1) for my 5.1 I have followed the steps of this video and I have already been able to with the Bose Companion II. What I see is that the equalizer is graphic and not parametric. Can they be done with...
  15. hemiutut

    EQ Software for Windows, Linux, macOS, iOS/iPadOS and Android.

    Thank you very much for putting this free program for Windows for everyone. Is there a forum, tutorial where you can see how to use it? written with translator Greetings
  16. hemiutut

    Cannot live without digital room correction now

    It would be nice to be able to listen to a double blind test matching with DSP the same frequency response between a Mackie MR824 type monitor vs monitors 10 times or more in terms of prices. Written with translator. Greetings
  17. hemiutut

    My acoustically treated Home Theatre

    SteveGTR 9th March 2017 Here is a new room we just worked on, adding the multi-sub system, with a number of refinements that have produced results that even surprised us. In particular, full range extension from 15Hz, near perfect time alignment and unanimously positive response from a number...
  18. hemiutut

    My acoustically treated Home Theatre

    If the person doing the equalizing doesn't know what they're doing, it sure sounds bad. It is very easy to see what the EQ does well in the lower frequencies by looking at the waterfall Besides, it is not necessary to put any resonator below the schroeder frequency, since with a multisub...
  19. hemiutut

    Just took a chance with TigerFox Immerse 360

    I see a lot of messing about a very cheap product vs much more expensive alternatives. It reminds me of when HSU Research introduced their products. at the New York Fair 2014. I recommend that you read the comments of the specialized press. By the way, curious that HSU Research does not receive...
Top Bottom