Search results

  1. TiborG

    Dual Merus MA12070 Amplifier Sabaj A20 fully balanced : pictures inside )

    On Monday, Amazon.de should deliver the Sabaj A10a - 1 chip version with MA12070, I am curious or this chip will overcome mine Fosi Audio TDA 7498E with which I am extremely satisfied. I was just fooled by the remote control, and the subwoofer output. It's a great combo with DX3 PRO or FiiOX5-3...
  2. TiborG

    Review and Measurements of Topping DX3Pro DAC and Headphone Amp

    I reinstalled the USB driver for Windows to version 4.47 and DX3 Pro no longer knows what a break in gaming is. He works 6-12 hours a day with 3 three sources - Intel NUC, Tempotec V1, smartphone, FiiO X5-3. But I don't use DX3 auto start.
  3. TiborG

    SPL Phonitor X Review (DAC & Headphone Amp)

    I love VU meters. Lots, lots of VU meters ....
  4. TiborG

    Review and Measurements of Topping DX3Pro DAC and Headphone Amp

    I use AKG K 702 64 Ohms with bass mod and Beyerdynamic DT 880 32 Ohm. Already at approx. 15-20 dB (high gain + 9 dB) It reliably pulls your head out of the hinges and without distortion (Low gain around 10 db)
  5. TiborG

    HIDIZS S8 USB-C Headphone Adapter Review

    But as usual, nothing is perfect. The main use for me was with my Tempotec V1 player, which has no analog output. Unfortunately, after 20 minutes of play, the player is dangerously hot. He certainly produced the same heat with Tempotec HD. Pulling on the battery will probably destroy the device...
  6. TiborG

    HIDIZS S8 USB-C Headphone Adapter Review

    https://audio-file.org/2015/11/07/foobar-default-user-interface-installing-analog-vu-meters/ Huge collection of VU meters
  7. TiborG

    HIDIZS S8 USB-C Headphone Adapter Review

    It works perfectly without stuttering even on DSD 256 via foo_dsd_asio. I think that as usual there is a problem with the operator and his equipment ... But I wouldn't even try it on an anemic machine.
  8. TiborG

    Review and Measurements of Topping DX3Pro DAC and Headphone Amp

    It is simple. DX3 Pro V1 seamlessly plays all PCM frequencies from 44.1 to 192 kHz via optical TOSLINK. Nothing more, nothing less. If the source (PC card, DAP, TV SPDIF output - anything) can handle these frequencies.
  9. TiborG

    Review and Measurements of Topping DX3Pro DAC and Headphone Amp

    However, this is the first prerequisite for 192 kHz transmission. The output is functional both DAC to the amplifier and to the headphone output. Of course, the relay clicks but plays without a pause. With ordinary plastic cable https://forum.psaudio.com/t/bandwidth-limit-of-toslink/3592
  10. TiborG

    Review and Measurements of Topping DX3Pro DAC and Headphone Amp

    He has already stated twice that the optical output is limited to a frequency of 88.2 kHz. This may apply to some old DAC in the AVR, but my 20 year old Sony DB 830 also handles 96 kHz. In my case, the DX3 Pro V1 decodes 192 kHz without any problems, as you can see in the attached photos...
  11. TiborG

    Improved audio quality on Bluetooth devices without aptX/LDAC

    I finally took the time to install the Magisk module with a modified SBC codec set to 486 kbit / s on my Samsung Galaxy S6 with Lineage 17 - Android 10. I set up SBC in Developer Settings and turned off AptX-HD and paired with my Topping DX3 Pro. Audio player FiiO Music, Neutron and UAPP. I was...
  12. TiborG

    Will Bluetooth audio quality improve?

    I finally took the time to install the Magisk module with a modified SBC codec set to 486 kbit / s on my Samsung Galaxy S6 with Lineage 17 - Android 10. I set up SBC in Developer Settings and turned off AptX-HD and paired with my Topping DX3 Pro. Audio player FiiO Music, Neutron and UAPP. I was...
  13. TiborG

    Linux settings for an audiophile

    I confirm that under Linux Arch, PulseAudio v. 12 it works - tested at 96 and 192 kHz and Topping DX3 delighted shows the required values. Sound identical to ALSA on SPDIF input to PULSE on USB input. Tested via mpd and Deadbeef.
  14. TiborG

    Linux settings for an audiophile

    Sorry for misinformation, I've been disconnected for a long time, even from paid Spotify. When it comes to money, the payee is always overactive.
  15. TiborG

    Review and Measurements of Topping DX3Pro DAC and Headphone Amp

    The Bluetooth on DX3 cannot even be turned off and will appear first on each transmitter. Even in off state DX3 !! Only pulling out the 15V adapter will help. But the reward is AptX-HD ..
  16. TiborG

    Linux settings for an audiophile

    Use the latest version of the mpd server. And fill in the login information for Quobuz or Tidal in mpd.conf. And of course your paths to music and audio hardware settings etc.
  17. TiborG

    Review and Measurements of Topping DX3Pro DAC and Headphone Amp

    If your refrigerator has bluetooth, it will be seen as the first pairing device.
  18. TiborG

    Review and Measurements of Topping DX3Pro DAC and Headphone Amp

    If the source of bluetooth stream is smatphone with Android, the reason is the effort of android to save battery. Newer Android has this saving hidden in the battery settings - every manufacturer on its own. As soon as I turned off the display, the smooth flow of sound started to stutter (I even...
  19. TiborG

    Review and Measurements of Topping DX3Pro DAC and Headphone Amp

    Good attempt to Dispose of DX3. From Android you have to go through OTG-USB adapter to DX3 supplied USB cable. Android Settings / Developer Settings / USB Configuration / Switch from MTP to Audio Source It depends on the Android version. I think Android 8.0 doesn't have this setting. Be glad you...
  20. TiborG

    Review and Measurements of Topping DX3Pro DAC and Headphone Amp

    OK, so sometimes go under Win 10, Mac OS X or Arch Linux sound through AptX HD and give a message .. Hang still on the cables, hmm
Top Bottom