Search results for query: DP3

...changing the firmware do the following: 1. Copy the file (update.upt) of the original (or any correct) firmware to the SD card and install it in DP3. 2. Plug the DP3 into an electrical outlet. 3. Simultaneously press and hold the "Power" and "FN" buttons (on the DP3 face). For DP5 it is...

...if so, at least in this way I will listen to music. However, I connect my Pioneer N30 via the optical cable and I only have 44.1. After coaxial with DP3 there is such a signal as it comes out of DP3. What else can I do? I would like the USB in the SU to work because the sound suited me best then.

I did as you prompted, but to no avail. Other DAC Topping, DP3 computer is properly detecting. So take it easy that the SU is damaged! Thank you for your help.

There is also the old DP3 from SMSL. I used it myself for a while and didn't find it bad at all. Music purely via Micro SD, PC USB, HDD USB, Lan, Bluetooth and other digital inputs. It also outputs the signal digitally to other DACs. In addition analog out and headphone connection. You have to...

Were you able to use it with the NVidia shield TV that time? Can you now? It's weird indeed. But I don't see how the NVidia shield TV could unset the DAC or damage it. I mean, it's not a storage device, you don't need to disconnect it the safe way. At least you were playing music and accidentaly...

@JohnYang1997 Is the production of a digital player also planned? Something like S.M.S.L. Dp3 but with Topping quality. I have nothing against S.M.S.L. The Dp3 is a very good product at its price, but I would prefer Topping quality. :-)

...try and do something amazing on the LM3886 -although I sincerely doubt it. SMSL is a "fast fashion" like a most of chinese brands. I had their Dp3's and quickly sold this misfire with underdeveloped software. There has also been a large crosstalk between channels and despite many requests...

Quality is on par with SMSL,Topping doesn't make a lot of product and they have made some not so good ones like everyone else

...but it came new and worked properly until I connected it to NVidia shield TV. It's hard! It is probably damaged. Fortunately, I still have DP3 :-). Is it possible to upload software to SU8? Because USB behavior is strange. Once on the USB DAC input it shows "no signal" sometimes 44.1 and...

...with a volume control? I was thinking about smsl sd9, but someone confirmed i could not use the rotary knob as volume control, does smsl dp3 or dp5 knob control vokume output in digital? Ideallt, i wid find a device that can play my files on ly hard disk, control volumr by rotary knob and...

Interestingly, I found a customer review on the Amazon listing for "lower" model SMSL DP3 also complaining about Input switchinch and SW in general: Looks like the HW / SW department of SMSL lacks "balance".. :rolleyes:

That review is from 2018

There are other such devices on the market, but they tend to be ridiculously expensive from "audiophile" brands. I suspect the market is small as the majority of people would probably just use a desk/laptop instead. This may interest you as well: https://headfonics.com/smsl-dp3-review/

FYI driver v. 4.82 is available on the website now. https://download.shenzhenaudio.com/#all Download S.M.S.L M200, M300, M400, M500, DP3 Drivers [4.82.0]

I advice everyone NOT to use this drivers. Causes audio drops on my M500...

It's the same as the SU-9 driver that can be downloaded from SMSL's HP.

...work as a DAC? Yes, I'm an amplifier maniac, I have many others, but I currently use the ones I mentioned above. My signal sources are an SMSL DP3 where I play FLAC via external HDD and bluetooth via mobile/notebook (Spotify and etc). I have doubts about the problems presented (freezing, DC...

...test in all possible scenarios of use. And as a processor for a computer, and as a standalone player from USB / HDD media. At least. The previous DP3 player had disastrously low quality code. The guys from HI-BY make a crude product and do not support the devices after six months, a year, two...

...as are the components used, remote controls, packaging, cables, etc. But there are also devices that are very unique, e.g. SMSL SAP-8, SU-8, DP3, or Sabaj D5. Topping and Gustard should each be independent, just like Singxer. Gustard has a very consistent structure/line for both the large...

OK I found the procedure ine their website but do I need it since I do not use this dac with a PC but with an SMSL DP3 music server.