Search results

  1. O

    New Devialet Phantom I - 103 Db - quick measurements

    hi, still good with zoom, delay resonance from my room (big BASS near wall) , should be better in anechoic chamber ...
  2. O

    Any plan for Devialet Phantom measurement?

    https://www.audiosciencereview.com/forum/index.php?threads/new-devialet-phantom-i-103-db-quick-measurements.20267/
  3. O

    New Devialet Phantom I - 103 Db - quick measurements

    hi, https://www.devialet.com/fr-fr/phantom-speaker/phantom-i/phantom-i-103db-light-chrome/ Case 1 : (MIC RTA calibrated at 94 SPL, in living room (not ideal) at 0,5 meter) Normal mode (latency lowered 190ms to 60ms (minimum) in Devialet Android APP), Volume 90%, MOTU 8A toslink output ->...
  4. O

    Devialet Phantom Reactor 900 Measurements (now with Spinorama)

    Hi, Since 2.11.2 update Low latency optical is possible in DOS2 https://help.devialet.com/hc/en-us/articles/360009457019-Migration-DOS-2-and-Phantom-Premier seems to be available on Reactor. I investigate "a how to" with REW measurement to check real latency with optical and this update...
  5. O

    Devialet Phantom Reactor 900 Measurements (now with Spinorama)

    Hi, don't understand your post. My firmware is 2.10 not 2.4.2 like this old copy screen..... in 2.10, the latency settings is show in value defaut is 120ms, 60ms is minimum latency in the Devialet menu... i want 5/10ms when i use ethernet and not wifi....and it's not possible
  6. O

    MINIDSP OpenDRC-DI ( REW measurements) problem

    Hi RayDunzl, Hi Devteam, But do you think it's better : Soluce 1 : Audio files 44100-> MAC OSX Motu driver at 44100-> USB Motu 8A TOSLINK out44100 -> at 44100 TOSLINK IN of MINIDSP clocked at 48000 open-drc-di , AES OUT at 48000-> AES IN HYPEX plate 252 amplifier Soluce 2 : Audio Files...
  7. O

    MINIDSP OpenDRC-DI ( REW measurements) problem

    Thanks So i can use this path without distortion? MAC OSX at 44100-> USB Motu 8ATOSLINK out44100 -> TOSLINK IN of MINIDSP open-drc-di at 480000 , AES OUT -> AES IN HYPEX plate 252 amplifier ?
  8. O

    MiniDSP DDRC-24 Resampling. Good or Bad?

    https://www.audiosciencereview.com/forum/index.php?threads/minidsp-ddrc-24-resampling-good-or-bad.9674/
  9. O

    Minidsp U-DIO8 USB to AES Converter Review

    Hi, look here, all minidsp products have serious problem with internal ASRC at 441000 to 48000: https://www.audiosciencereview.com/forum/index.php?threads/minidsp-opendrc-di-rew-measurements-problem.14180/
  10. O

    MINIDSP OpenDRC-DI ( REW measurements) problem

    Hi, MINIDSP OpenDRC-DI REW TOSLINKloopback measurement : Clock motu internal 44100 Hz (external optical clock don't work because minidsp is at 480000 : MOTU 8A 44100 TOSLINK out -> miniDSP(48000) TOSLINK IN -> miniDSP TOSLINK OUT(48000) -> MOTU 8A TOSLINK in the ASRC of MINIDSP doesn't...
  11. O

    Devialet Phantom Reactor 900 Measurements (now with Spinorama)

    About SPL : I've measured at 1m with Calibrated (at 94/114 dB) RTA, my Reactor 600 : AT 100% volume : MAX SPL with this kind of noise : 1) SWEEP 20Hz to 20000 Hz : between 95/100dB SPL 2) Single TONE 1000HZ during few minutes : 95/96 dB SPL 3) PINK NOISE during few minutes : 90/91 dB SPL...
  12. O

    MOTU M2 loopback measurements

    Hi, With better ADC, without mic integrated preamp TRIM like M2: MOTU M2 DAC OUTPUT MAX VOLUME -> TO MOTU 8A ADC (TRIM +7 to have - 0,6), balanced :
  13. O

    MOTU M2 loopback measurements

    HI, i will measure my MOTU M2 of my Daughter today with REW too.
  14. O

    MOTU M2 loopback measurements

    Hi, Do you use the 24 bits drivers ? and a generator in 24 bits dither ? ( not 16 bits? ...)
  15. O

    Devialet Phantom Reactor 900 Measurements (now with Spinorama)

    Hi, It's always good to check the software with a perfect virtual loopback cable (32 bits virtual cable), and then go to the real life.... Thanks to you i've discovered the 1M/4M options in Sweep :), perhaps phase measurements will be better with less distortion in sweep.... wait and see
  16. O

    Devialet Phantom Reactor 900 Measurements (now with Spinorama)

    Hi, I use the SWEEP of REW. (Default sweep), ok i try with 1 M :) Thanks, much better with 1 M :
  17. O

    Devialet Phantom Reactor 900 Measurements (now with Spinorama)

    Hi, Is there a bug in Distorsion measurement in Rew ? Perfect 24 bits virtual software cable : with SWEEP : High Distortion between 20 and 100 Hz, even with several lower Headroom..... But with single tone RTA, 24 bits result good : With the SWEEP at 20 Hz, loopback virtual cable, ...
  18. O

    Devialet Phantom Reactor 900 Measurements (now with Spinorama)

    Hi, the woofer in Phantom classic have a bandwidth : 14 to 300 Hz see :
  19. O

    Devialet Phantom Reactor 900 Measurements (now with Spinorama)

    Hum now i found LR 60 dB at 170 Hz not LR 24 dB crossover at othher values.... i will order new support..... for new measurements, outdoor... Thanks for the share, and help :)
Top Bottom