Search results

  1. B

    Soncoz LA-QXD1 Balanced DAC Review

    It's not actually a power supply issues, it's static electricity that causes the failure of the op amp. You can see HERE and units shipped after that are specially optimized for static electricity.
  2. B

    Soncoz LA-QXD1 Balanced DAC Review

    If you encounter problems with the product during use, you can contact the dealer you bought in the first time. We will deal with your problems in a timely manner, including product related issues such as return or exchange.
  3. B

    SONCOZ SGD1 Audio DAC Review

    XLR Balanced and RCA single-ended outputs can be used together.
  4. B

    SONCOZ SGD1 Audio DAC Review

    After consideration on a number of occasions, we decided to reduce the standby time to 40 seconds.The new firmware can be OTA upgraded.
  5. B

    New Soncoz Headphone Amp coming soon?

    Both HPA and PRE work independently.
  6. B

    SONCOZ SGD1 Audio DAC Review

    Is that true?I can't tell the difference between the interfaces for the same 192kHz music file.I'll go and hear some more. Ten minutes into standby seems like a long time, and I'll consider updating the software.
  7. B

    SONCOZ SGD1 Audio DAC Review

    I'll see if the problem can be repeated.As you said, it should be a software problem.
  8. B

    Soncoz LA-QXD1 not playing with the correct sampling frequency (44098Hz) and has no amixer support

    Check this and try our new firmwar which supported hardware volume control. Download DFU files from HERE and after unzipping, you'll find two files“LA-QXD1 Maximum Volume with Hardware Control DFU_V502.bin” and “LA-QXD1 Minimum Volume DFU_V501.bin”. Change log:2020-11-11 Fixed DSD playback...
  9. B

    Soncoz LA-QXD1 Balanced DAC Review

    LA-QXD1 supports USB to digital SPDIF RCA output([email protected]),not toslink and coaxial input to coaxial output. SGD1 supports all digital input to coaxial output.
  10. B

    Soncoz LA-QXD1 Balanced DAC Review

    After a period of research and discovery of the specific causes of equipment failure or damage, we generally determined that strong static electricity is the culprit.Especially in some dry air in the region will appear the probability of failure will be higher. We tested it in different areas...
  11. B

    Soncoz LA-QXD1 Balanced DAC Review

    Strong EMI is a big concern for electronic devices. For LA-QXd1, strong EMI can cause the XMOS chip to reset (and not connect to USB). As far as possible away from the use of strong electromagnetic interference environment is currently the most effective means to avoid this problem.We are also...
  12. B

    Soncoz LA-QXD1 Balanced DAC Review

    Thanks @uryupinsk , We fixed DSD playback reverses problem. Download DFU files from HERE and after unzipping, you'll find two files“LA-QXD1 Maximum Volume with Hardware Control DFU_V502.bin” and “LA-QXD1 Minimum Volume DFU_V501.bin”. Change log:2020-11-11 Fixed DSD playback reverses problem...
  13. B

    SONCOZ SGD1 Audio DAC Review

    It's in product planning .
  14. B

    SONCOZ SGD1 Audio DAC Review

    They have the same appearance.
  15. B

    SONCOZ SGD1 Audio DAC Review

    Thank you for selecting the SONCOZ DAC product. This is very good advice, and we will make plans to test this remote.
  16. B

    Soncoz LA-QXD1 Balanced DAC Review

    We are planning to launch our adapters soon.
  17. B

    Soncoz LA-QXD1 Toslink audio cut out issues with TV

    Recently I have been testing the problem you have encountered with the toslink input problem, and have not found the phenomenon you have encountered. I am not using the TV model you use, so it is a little difficult to find the TV model you gave me. I will try to spend more time testing, where...
  18. B

    Soncoz LA-QXD1 Toslink audio cut out issues with TV

    I am still trying to find this model of TV to verify, it may take some time, I have verified on other models of TV and found no problem.
Top Bottom