Search results

  1. M

    Audeze LCD-X Over Ear Open Back Headphone Review

    I agree I must say. In fact, my major criticisms were about: non calibrating the measuring device because ok it is consistent with its own measures, but what about consistency with headphones measurements over the web? (There are a lot, conversely to DAC and Amp measurements that cost a lot more...
  2. M

    Audeze LCD-X Over Ear Open Back Headphone Review

    Another question, what is the point of measuring imd at 132db? This is far from a normal case scenario
  3. M

    Audeze LCD-X Over Ear Open Back Headphone Review

    Yeah that is what I actually did and will do if headphones' reviews are done in this way. There is no point for me in judging a headphone based on the Harman curve or on thd that is truly misleading. I just hope people read through reviews completely and don't get fooled just by a headless...
  4. M

    Audeze LCD-X Over Ear Open Back Headphone Review

    Buy why should we take Harman as the main sounds signature? I don't like it and the are plenty of people not liking it. This is not something objective as a dac or amplifier sinad that is objective that should be the lowest as possible. Also, in a forum that is all about the science, how can we...
  5. M

    Anaview AMS0100 DIY Speaker Amplifier

    I am selling this amplifier I built myself and that I also reviewed here: https://audio-monkeys.com/amplificatori/anaview-ams0100-it/ It is also on sale on eBay here: https://www.ebay.it/itm/283932364159 but if we conclude on ASR there is a 12% discount on that price (449). Feel free to make...
  6. M

    Topping D90 Balanced USB DAC Review

    Oh god! I watched that video and there is SO MUCH nonsense. At 11:46 there is the point where my bullshit-meter measured the max ever measured probably
  7. M

    WolfX700 Measurement of Topping L30 Headphone Amp

    Adding distortions cannot solve the problem, it just masks the possible errors during productions. If production is done correctly, a good measuring audio chain will give the life-like feeling that most of the "audiophiles" claim their stuff produce.
  8. M

    Topping A90 Static Issues (help please)

    That is strange, my old d50 didn't work without 5V+ connected because the PC couldn't see it, same as sgd1, la-qxd1 and d90. Anyway the problem is the ground so it is a safer bet to just disconnect the ground, but if your works then it is ok
  9. M

    Topping A90 Static Issues (help please)

    My DACs doesn't work when power is not connected, that is why I just suggested to pin the ground
  10. M

    Topping A90 Static Issues (help please)

    I did it with mine and there is no noise, you just have to be precise in putting the tape just on that pin, you can help yourself with a needle. Now I am waiting a custom USB with no gnd pin from pexon cables, to have a cleaner result
  11. M

    Topping A90 Static Issues (help please)

    Just put electrical tape on the gnd pin of the USB cable you use for the Dac, that should solve it in the cheapest way possible
  12. M

    Topping D90 Balanced USB DAC Review

    @JohnYang1997 do you know if d90 and a90 respect the AES48 standard? And also if xlr pin 1 is grounded to the chassis
  13. M

    Was this aimed at ASR?

    Because I like electronics that do not color my sound in order to leave that job to my speakers or headphones based on my tastes. If everything in the audio chain adds some coloration than it is an uncontrollable mess, but instead I can easily try different speakers and find the one I like the...
  14. M

    Was this aimed at ASR?

    I understand your point and I am not saying it is wrong, on the contrary. I am just saying that it is misleading to have a "bad" panther or a "not recommended" at the end for speakers that have very good measures overall but a not flat frequency response, since the newbie reader could understand...
  15. M

    Was this aimed at ASR?

    ? Do you think only flat frequency response speakers sound good? I don't. I believe that if I want a flat response speaker I will buy one, but maybe I like something different. That is what I am pointing out. While for a DAC and an Amp I agree that they should be transparent, a speaker or a...
  16. M

    Was this aimed at ASR?

    I agree with the fact that judging a speaker not good just because it is not balanced is stupid and I cannot understand why a lot of times amir does it. I read the graphs in the reviews, but completely jump the conclusion since reading " I cannot suggest these speakers because they have not...
  17. M

    Affordable Accuracy Monitor Review

    I am building AAM+ my own with a lot of DIY and I actually cannot understand how Dennis sold them at around 300$, I paid 70+180 just for the Woofers and Tweeters, ok I am in EU and not in US so it is imported stuff and it costs more, but still that price was impressive
  18. M

    Soncoz LA-QXD1 Balanced DAC Review

    Since it is a "simple" DAC, measurements are very precise in characterizing its sound. But yes, maybe if someone prefer a DAC that change the original sound in a smoother one or a warmer one, than you are not looking for perfect measurements and thus they do not matter so much for that people...
  19. M

    Soncoz LA-QXD1 Balanced DAC Review

    The problem is you said to be equal to other 200$ DACs while I can show you a lot of DACs with higher prices that perform way worse than this
Top Bottom