XpanD's latest activity
-
XpanD reacted to Roland68's post in the thread Do CD players sound different to each other? with
Like.
If a comparison is made when ripping, where should the sonic differences come from? There are enough tools with which you can make a BIT... -
XpanD reacted to DonH56's post in the thread 1 foot solid silver conductor interconnect vs. 0.5 foot Mogami W2964 interconnect with Like.
It's measurable, yes, but inaudible. The science says you will not be able to distinguish copper from silver cables if the conductor...
-
XpanD reacted to wwenze's post in the thread 1 foot solid silver conductor interconnect vs. 0.5 foot Mogami W2964 interconnect with Like.
Ahh, there it is, the true motivation behind the thread.
-
XpanD reacted to MaxwellsEq's post in the thread 1 foot solid silver conductor interconnect vs. 0.5 foot Mogami W2964 interconnect with Like.
You are in the wrong forum. This place tends to be interested in reproducible, measurable tests which none of us can do with your senses.
-
If you roll in a high bandwidth opamp, they can be very useful for inducing oscillation. This can destroy a lot of other circuitry...
-
XpanD reacted to wwenze's post in the thread Do low power amps lack bass? Or do they clip? with Like.
This is a track with 100Hz and 2000Hz at the same amplitude This is the same track amplified 14dB so that it is +6dB clipping So...
-
Here are the towers that I'd look into: -KEF R5 (non-Meta) -Revel F35, F36, F206 -Emotiva T2+, T3+ All of these brands offer matching...
-
Tekton just lost Zero Fidelity, who took his respective videos down. I believe one was the most viewed Tekton video on the internet at...
-
Preference Rating SCORE: 5.6 SCOEW w/ sub: 7.5 Sensitivity: 87.6dB (300Hz-3kHz ; spec: 88dB) Frequency response: +/- 2.8dB 80Hz-20kHz...
-
This is a review, listening tests, EQ, and detailed measurements of the Revel F206 Floor-standing speaker. It is on kind loan from a...
-
XpanD reacted to Blumlein 88's post in the thread Where is the Flaw in most Multichannel Preamps/ AVRs? with Like.
Okay, imagine you had a voltmeter that would measure evenly up to 20 khz. Imagine you had white noise which is an even amount of energy...
-
Solder (and de-solder) carefully! Or better yet, "if it ain't broke don't fix it." ;) I'd expect no audible difference in a proper...
-
Ok so now something very interesting. ME Geithain ITS 100 so 2x 8" woofers with gigantic magnets, cardioid enclosures and a 28mm...
-
Well, this discussion has made its way over to Audio Karma as well. I used to participate a lot over there until they started bashing...
-
XpanD reacted to Dave Bullet's post in the thread UMIK-1 or any USB MIC unsuitable for timing measurements? with Like.
Whilst not the prettiest thing in the world, I found a PVC boom pole majorly reduced high frequency ripple / reflections that clips and...