I used GRAS 43BB. Obviously, the noise level was low, but the maximum input limit was low. Difficult to measure earphones simulating ear canal resonance (+8 ~ 18dB) at 3kHz
In addition, since the microphone diaphragm is very flexible, it is necessary to couple earphones and stabilize for 1...
Dirac Bass Controll is not yet supported. But I am looking forward to it.
Below is the setting window of my minidsp SHD. As you can see it is roon ready.
The minidsp team is increasing roon compatibility through firmware. It will soon be certified by roon.
https://www.minidsp.com/products/streaming-hd-series
Consider the minidsp SHD series. It is currently a roon ready product and has not yet been certified, but will soon be officially supported.
If the NAS is used as a roon core, Dirac and roon can be used without a PC or MAC.
JBL M2 + AHB2+MINIDSP SHD (DIRAC 2.0
Magenta: DIRAC correction, Gray: DIRAC OFF
In fact, the lack of EQ tab in SHD STUDIO failed to duplicate all the presets of the JBL M2.
KEF also seems to be aware of that. Below is a white paper from KEF REFERENCE 5.
"
The Reference Uni-Q is designed to cover the frequency range from 350Hz upwards. This allows the Uni-Q array to cover the entire critical upper six octaves of the audio band whilst at the same time not requiring...
Very good question. At first, I also tried to use it as an LF amplifier and an HF amplifier. But for a better way, I consulted John Siau, president of Benchmark media.
He told me:
"Crosstalk is never an issue with the AHB2. There will be no audible crosstalk from the AHB2 in any system...
It's a bit complicated to explain.
First, as you can see in the figure, the roon core is a DS218 + NAS.
In roon, SHD STUDIO and mac mini are grouped together. Then you may have a question. Why use mac mini?
This is because SHD STUDIO does not have a bypass function. I monitor the RTA meter...
This is my roon setup now. My recommendation is to use the NAS as a roon core. If the file tag is modified after connecting the NAS to macos or windows, it is not reflected immediately. However, the problem does not occur when using the NAS as a roon core. It works fine on my DS218 +, but if...
When used with Benchmark dac, it is turned on and off in the order of DAC-> AHB2.
The setting I am using is DAC3-> AHB2-> AHB2. Both AHB2 are turned on and off simultaneously.