soundflo_w

Another question: If I ran with ART, I would need the complete bundle (+Room Correction +Bass Control), right?

Regarding Geddes approach or "double bass"/LFE+main: Yes I could see this working relatively well. My first thought was: A slight low...

Couple of points. Vulkan's are not subs - they have what people call "useful" output below some point - not sure if 80 or 60hz, but...

Thank you all very much for your responses! Regarding my current setup: I haven't committed to any specific hardware or bass management...

I would strongly advise against doing this. When MSO first started out in 2015, it had only "subs+mains" configurations, for which it...

You may run a MSO optimization with 2x main speakers (w/o high pass filter) and 2x subwoofer (with low pass filter) setup. This is know...

Thank you for the suggestion. Could you please go into a little more detail how this works? Do I measure the main speakers up to 20kHz...

The first thing that springs to mind is to get an AVR with Dirac ART. Dirac ART doesn't do bass management in the usual way, but allows...

Hi everyone, I’m in the process of building a home theater system in my living room and have the opportunity to use my father’s vintage...