sejarzo's latest activity
-
sejarzo replied to the thread SMSL DO100 Review (Stereo DAC).The spec on the page for that amp at 8 ohms is: 8 ohm - 25.5dB/2.3Vrms (High), 20.5dB/4.0Vrms (Medium), 15.5dB/7.1Vrms (Low) A gain... -
With Amplifiers, always use the lowest gain that still gives you satisfying volume. No matter if RCA or XLR, 2V or 4V, 4Ω or 8Ω.
-
That's the input sensitivity, which means the input voltage required to reach rated output. Still, if you already own a DAC and Amp...
-
sejarzo replied to the thread SMSL DO100 Review (Stereo DAC).Which model? I took a look at the website and see for the Hypex NCx500 2-Channel that he lists an input voltage along with the gain in...
-
sejarzo replied to the thread SMSL DO100 Review (Stereo DAC).Where did you read that about the Buckeye? Gain is in dB, not voltage.
-
sejarzo reacted to solderdude's post in the thread Tekton M-Lore Speaker Measurement Update with
Like.
Bass port tuning did change/improve a little bit. Step response does look a bit better and for a simple passive speaker does not look... -
sejarzo reacted to sweetchaos's post in the thread Tekton M-Lore Speaker Measurement Update with Like.
-
sejarzo reacted to thewas's post in the thread Topping D50 III Balanced DAC with EQ Review with Like.
Can the in total 10 PEQ filters be spread for the left and and right channel, for example 5+5? If not its not really useful for most...
-
sejarzo reacted to Sokel's post in the thread Topping D50 III Balanced DAC with EQ Review with Like.
We also have to mention that EQ is applied to both channels and (until now) there's no way for different settings on each channel. That...
-
sejarzo reacted to John_Siau's post in the thread Upsampling 16/44.1 collection a good idea? with Like.
Absolutely a bad idea!!!! DON'T Upsample Your Music Files! I cant emphasize this enough! Don't do it! Don't do it! Don't do it...
-
This not my experience. I've tested different DACs with AKM, ESS, ADI and CRYSTAL DAC chips and all of them showed relatively benign...
-
sejarzo replied to the thread Upsampling 16/44.1 collection a good idea?.Perhaps, but using convolver is the simplest way for someone with a variety of headphones to quickly implement the desired correction to...
-
sejarzo reacted to Keith_W's post in the thread Upsampling 16/44.1 collection a good idea? with Like.
Upsampling can have a positive effect if you are using a convolver. It reduces latency. The calculation for FIR filter latency is...
-
To add more context to Melomane's reply ... The sampling rate of the impulse response for the FIR filter and the sampling rate of the...
-
sejarzo reacted to fieldcar's post in the thread Upsampling 16/44.1 collection a good idea? with Like.
Wow. Very interesting "conversation" we're having here. Oh.... Say, what's your sensitivity to harmonic distortion? -20dB? -30dB...