rallychief

Ok madness is descending, got fed up with it yesterday switched it all off and gave up, just fired it up again and its working...

Yep i understand about the max slider in app, what i am saying is that with the app in Dac Amp settings screen, i engage High Gain, then...

To get 2Vrms, you need to enable 2Vrms mode, then increase the volume.

The 5K is quite a feature rich device for what it is. To get the most out of it, it really would behoove you to read the comprehensive...

Ok L30 2 arrived, still have issues, 5k would not output 2v from se, did some research and came up with possibility of phone being issue...

Ok decided to go with L30 2 as size is another consideration, it will be in a bedroom system, and needs to sit on bedside table, ordered...

The 4 Vrms output from the 5K is completely sufficient to drive the A20h to its max output. But if I were you, I would still consider...

Looked at Sabaj AH20, that would work for me being balanced re cable, outputs on back might be a pain, the big issue is the the AH20...

Hi staticV3, fyi the output from balanced cable is a little low on one channel 3.78 volts, (Left) and 3.94 on other i did it at the...

Just FYI, the Atom's 4.4mm output is there just for convenience and offers neither extra power nor better sound quality. If you already...

Ok will try that ie measure voltage. my problem is i have hi fi man xs with balanced cable, i listen to internet radio a lot uk stations...

@rallychief before you declare the 5K too weak, use a basic multimeter ($10-15) and double check your playback chain and 5K...

Yes, unfortunately getting JDS devices for non US customers is an hassle and a lot more expensive, and given that you can't even...

Came up with a slightly different plan, that is JDS Labs Atom 2, as it has 3.5mm input, saving need for RCA-3.5mm conversion, and has...

Perfectly fine, the first dashboard in Amir's measurements is indeed as a pure DAC: I assume you intended Topping L30 II as for the amp.