pogo's latest activity

Here we go to the next round and again with switchable DF like in the A200 (stereo version): T+A M200 The new purifi design may already...

Teufel M200/M6000 (isobaric sub)

No. That's why the C399 has a very high damping factor, see also here: Link

Open your preferred target curve file in the operating system text editor. There you will see a list of frequency and amplitude values...

In other words, the JC-1s will "sound better" for my application (400W 8 ohm, 800W 4 ohm - 25W class A), but the Benchmark would be...

The JC-1 has 25W Class A. I know my speakers never get out of Class A mode AFAIK. Very happy with the sound of the JC-1.

Is there any news on this?

This is actually the same but described in different words, as it is written in the manual of the A200 (except for the height of the...

No, the speakers are connected in bi-wiring to a NAD M33 and yes they are 30 years old ;) And now I'm back to the same point I posted...

But even with this small bass peak, my overall low frequency range is attenuated, isn't it?

See my post #262

@xnor So you wouldn't expect a bass boost with my specific speakers, would you?

I have calculated the conditions on my impedance curve at significant points and I do not see overall any bass boost at DF=60. But you...

This seems to be the case for a current drive amp design, but we mainly use voltage drive amp designs, don't we? This is also shown in...

@xnor, Tnx for the confirmation. Again from post #239: Actually, an amp with low DF should sound like less low frequency power...