mitchco's latest activity
-
mitchco reacted to restorer-john's post in the thread Does Phase Distortion/Shift Matter in Audio? (no*) with
Like.
Yamaha engineers achieved this in the early-mid 80s. (DSP-1 release 1985). I used to have a lot of information from Yamaha on the array... -
mitchco reacted to levimax's post in the thread Does Phase Distortion/Shift Matter in Audio? (no*) with Like.
Thanks for a great post and great links. Do you have a preference for one of these combinations? Do other people that got to listen to...
-
mitchco replied to the thread Does Phase Distortion/Shift Matter in Audio? (no*).Have you looked at @j_j 's presentation (download the PPT) on Acoustic and Psychoacoustic Issues in Room Correction. As far as how, one...
-
mitchco reacted to j_j's post in the thread Does Phase Distortion/Shift Matter in Audio? (no*) with Like.
That was a lot of (justifiable) questions. I'm trimming out the "is it audible" with the comment "sometimes". (more so inter aural...
-
mitchco reacted to j_j's post in the thread Does Phase Distortion/Shift Matter in Audio? (no*) with Like.
Actually, a linear, non-minimum phase system CAN be corrected with LONG filters and a lot of work, but the correction is never perfect...
-
mitchco reacted to KSTR's post in the thread Does Phase Distortion/Shift Matter in Audio? (no*) with Like.
@Keith_W, I think you still mix up a few things. Loudspeaker drivers and fullrange single-driver loudspeaker systems are generally...
-
mitchco reacted to KSTR's post in the thread Does Phase Distortion/Shift Matter in Audio? (no*) with Like.
Yep. For successful DRC it's best to make the speaker behave like a true minimum-phase system first (no allpass "excess" phase), then...
-
mitchco reacted to KSTR's post in the thread Does Phase Distortion/Shift Matter in Audio? (no*) with Like.
You might want to try a pure phase correction of the crossover allpass behavior first, that is, unwrapping only the phase rotation from...
-
I have recently experimented with Xtalk shaper using my living room rig. This week, I installed MacroDeck onto the PC which runs Hang...
-
Let me make this clear one more time: while I appreciate the sentiments, I do not need any monetary help from the membership myself. I...
-
mitchco replied to the thread Introducing Hang Loose Convolver from Accurate Sound.No disagreement @UliBru And I am not saying one way is better than the other either. In my case, it just turned out that way due to the...
-
mitchco reacted to UliBru's post in the thread Introducing Hang Loose Convolver from Accurate Sound with Like.
The sequence 1L, 1R, 2L, 2R ... is based on logic. The intention is to keep the user away from arbitrary channel assignments. The target...
-
mitchco replied to the thread Introducing Hang Loose Convolver from Accurate Sound.@Keith_W and @DWPress thanks for the assist guys. Keith, just wanted to point out that there is nothing wrong with Audiolense's config...
-
mitchco reacted to DWPress's post in the thread Introducing Hang Loose Convolver from Accurate Sound with Like.
Ah, I see. I've never hand coded a 8ch .wav into a cfg before. Last time I used 8ch.wav was with a different multi ch convolver and had...
-
mitchco reacted to Keith_W's post in the thread Introducing Hang Loose Convolver from Accurate Sound with Like.
I am sorry, I disagree with your interpretation. If you look at his .cfg file you will notice that he is using an 8 channel .WAV file...