MC_RME's latest activity

Not pricey, but yes, some additional costs. If none of the provided ones could give a good seal then you might need extra large. Two...

@EricZenviewStud I've watched the video now, and it took a while before I could understand it by looking closely at the numbers on your...

I am curious - did you ever measure what 15% on Windows volume slider really means? For example in AIMP volume slider the 15% give...

A new version of DeltaWave is available for testing, v2.0.19: https://app.box.com/s/hlglgy3aj39rjfxu343fho4t0cdrq9v8 1. This version...

That has been fixed for the next build. Total input rms was being used as the reference for plots instead of the relevant tone level for...

It may not be about the "transition" to the H mode. It may be due to implementation specifics of the H mode itself. We cannat rule that...

The answer has been mentioned/explained here several times with nice graphics, but I coudn't find it when searching. 24 kHz for 44.1 kHz...

I did some additional analysis of the DAC chip's dynamic range adaptation behavior. Here's a sneak peek: See my description in this...

I am not aware of any device reaching such values at an unbalanced TRS output. Plus these values need some perspective - you won't be...

Exactly. The ADI-2 Pro had no change in used AD/DA and overall performance, except for the change from AK4490 to AK4493 in earlier times...

Good catch. I did not perform the measurements in the 'intuitive' order, and the AP software does not allow any reordering. So the...

Bravo-HD, like with Fosi DS2 and others.

'This russian website' confused me a lot by talking about 'clicks', a very clear and defined english word, that seems wrong for the...

Yes. And while the output is not galvanically isolated using an 'electronically balanced' output (99% of devices have that) into any amp...

So that matches my value (with signal above -143 dBFS) quite well. The AP SNR measurement is a fixed, quick measurement process...