killdozzer's latest activity

Anybody watching this? It is really good so far. Better than the 1980 mini-series. From the James Clavell book. I do wonder about...

Kudos for the topic. I think this is a very welcome approach. There are people who want to act upon some solid info, but still need a...

Okay, I'm looking at two reviews, and trying to see if I should get one or the other I'll post links below. After that I'll let you...

yeah thats true you need to know how to read the specs but its even better when you have actual independent measurements such as from...

And that's exactly what I'm saying - a heat sink that meets end goal. Adding a few pounds of machined aluminum to your heatsink wouldn't...

Again, the wrong direction. Spec sheets, and in particular the ones for AVRs, are anything BUT conservative (as they call them). An...

Flat measuring loudspeakers? Still pretty rare, if not virtually unknown IRL.

It's not as easy as that. For example, you can have a flat measuring speaker going down to, let's say 37Hz and one that goes down to 55...

Realistically, if an amp is rated for 4 Ohm nominal speakers, it should be expected that the speaker impedance will drop well below 4...

This is demonstrably false. AVRs are not under the same regulations for stating power specs as amps. This has been the biggest problem...

Over priced boutique gear can carry it. I've not found an obvious amp example - but here is a DAC. They even boast that it is...

So likely averaging little more than a watt or 2 depending on distance and speaker sensitivity.

Is the above info outdated ? I see the opposite with HYPEX amps all being advertised at the max spec and Yamaha AB's advertised at...

No evidence so far that generally the integrated amp will be any more capable of handling difficult and complex loads particularly that...

If there's one to steer clear of, it's Hegel. They proved to be perfectly willing to put to the market a unit which is poorly designed...