kejar31's latest activity

So I lied there is more pics.. went ahead and tried to print option 2.. it came out pretty good.. this is in abs but still a test...

So I have decided to try an option two. This time it is not split instead I removed the bottom pegs and created inserts to allow for...

Okay, glad that worked for you.. but I have a different set of goals than you and have these concerns with printing this in its side...

The overhang with it upside down and keeping the print as clean as possible. By splitting it you get a much cleaner print. I am sure...

okay threw the waveguide in cad today and took a good look at it.. Separated the top and bottom to allow for easy printing on a FDM...

Just ran across this thread today.. Anyways I was thinking that the waveguide design can probably be modified for better FDM printing by...

Well there is correct and incorrect placement of speakers in a room.. Although regardless I am pretty sure I read, correct installation...

This right here is great advice.. If you just push that 400hz up blindly it may lead to an unnatural chesty sound..

Here is an example of my RP-500M measurements (SR and SL speakers) using this method vs one I got from Erin's Audio Corner with which he...

Well, if you go this far, might as well lift that speaker up on its side about 4 feet with a stand and take a gated measurement lol.. I...

I have a similar situation... AVR in the room beside my theater. Although in that rack I do have a small cluster of servers etc. I just...

Again time aligning using the impulse response is really easy now with REW and cross correlation.. Also volume matching is pretty easy...

Well the impulse response is used to help time align for distances so yeah pretty sure that is what he was talking about.

What impulse response correction? The only thing they would do with the impulse response is align them which you can do in REW.. I mean...

They aren't, because they have to use the in-AVR tone generation for timing. If you want to use the UMIK-1, exclude your measurements...