Rest assured that I'm not talking about a loudness adjustment control (which is another can of worms :p). Here we are talking about the same thing.
My point was/is that "gently tweaking the overall tonality of an elready existing EQ" also technically depends on the volume at which you're...
Actually we could go even further, to the 1933 Fletcher-Munson curves that most if not all modern research (including Harman and others) is based upon.
There is of course no ideal Tilt filter, because that will always depend on:
The volume at which a given listener is listening to his music...
It's true.
In my app people can use up to 6 dB max amplitude (up to 2 dB per filter in your case). Here's an excerpt from the manual.
But I generally don't go further than 3 dB in my listening sessions (1dB per filter in your case).
Also, my Tilt filter is centered around 1 KHz. No special...
It certainly is accurate, for a parametric solution. Nice.
Here's an example with 3 x 3 dB gain (total filter amplitude being 9 dB or +/- 4.5 dB).
We stay within +/-1dB of the straight line, except below 30 Hz.
Its beauty lies in its simplicity (only 3 HSQ filters).
It would be easy to be...
Thanks for your kind replies :)
I'll have to think this through, also taking into account the total depth of the speakers + their wall mounts. I wouldn't want the speakers to be so deep that they would end up being closer to me than the curved monitor itself.
I guess I'll have to set up my...
Thank you for a neat reply :)
A pair of 8010A would definitely fit my budget. Even a pair of 8020D would fit (sort of).
Of course Genelec subwoofers are way too expensive (nearly 800 € for a 7040A), so I'd have to find something else.
Plus in general terms I don't really 'love' Genelec's...
Hi everybody,
I'm currently designing my future PC desk setup, and besides performance, I'd like it to be as clean as possible visually. For example, the large 45" 21:9 curved monitor (3440x1440) will be wall-mounted, so no visible foot/feet, and no visible cables either: it will just 'float'...
Since you are talking about me, then know that I just happen to be an engineer from one of France's top schools, which happens to be the equivalent of MIT.
Is that "real engineer" enough for you? Do I need to justify my studies and my knowledge just to please you? :facepalm:
And BTW, when you...
Our L30 amps are unbalanced anyway, so the only use for balanced would be for my wife (current topic), if she got a balanced dongle of course.
But I don't think she'll ever need that, because her outside listening is relaxed and within reasonable sound levels. Honestly I don't think she ever...
Of course, my reasoning would be different in the case of balanced :)
But all our equipment (headphone amplifiers and headphone cables) is unbalanced, and that's a deliberate choice from the start. We don't want/need balanced. There's an ASR topic where that was discussed back in time. We are...
My instinct (and my wife's taste) is telling me to lean towards the iBasso DC03 Pro.
Recent measurements by an ASR member look pretty good: https://www.audiosciencereview.com/forum/index.php?threads/quick-measurement-of-ibasso-dc03-pro.44595/
Here are some reviews from Head-Fi - all pros, no...
Thanks Jimbo. Yes, we're about wired. We're both done with Bluetooth. Just too much hassle.
On paper the e1da sounds nice, since it can provide up to 180mW @ 32 Ohm and 20 mW @ 300 Ohm.
However it's said to pick up 2G/4G/5G interference and it's not recommended for smartphone use.
Amir didn't...