Thank you. As I wrote in the 1988 article I linked to earlier, "We regard it as axiomatic that our primary loyalty is to those who pay money every month to read our opinions. Stereophile's—in fact, any magazine's—underlying responsibility must be to its readers if it is not to become the poodle...
Stereophile has always sent manufacturers a preprint of the review ahead of publication so that they can send a comment for publication. Regardless of how the manufacturer reacts to seeing the preprint, the text of the review is not changed.
See this article on this subject that I wrote in...
https://www.soundandvision.com/content/star-date-1997-lessons-past-still-apply-part-2
It's fair to point out that Tom Norton took part both as a proctor and a listener in many single-blind loudspeaker tests for Stereophile in the 1990s.
John Atkinson
Technical Editor, Stereophile
I produced the CD, with Martin Colloms and Tony Faulkner; the garage door recording was by Mike Skeet.
I ordered 1000 CDs from Denon at a landed price of 8 pounds sterling each. After the CDs arrived in July 1985 and were being sold by the Hi-Fi News Accessories Club, I got a memo from senior...
Larry Klein explained at a 1990 AES Conference that this was Stereo Review's policy when he was that magazine's Technical Editor back in the early 1980s.
John Atkinson
Technical Editor, Stereophile
Thank you. The mystery is that not just Stereophile's reviewer, but others had auditioned the same samples of the Infigo amplifier that the magazine reviewed and that I measured at audio shows and at a listening event at VPI and no-one heard any problems, I discussed this paradox at the end of...
I use an inexpensive Mastercool 52224-A-SP infrared thermometer for my amplifier testing - https://www.tequipment.net/Mastercool/52224-A-SP/IR-Thermometers/
As I am only interested in measuring heatsink temperatures, this serves that purpose.
John Atkinson
Technical Editor, Stereophile
As always, please include a link to my Stereophile website measurements page in instances like this: https://www.stereophile.com/content/kef-blade-two-meta-loudspeaker-measurements
John Atkinson
Technical Editor, Stereophile
For consistency in how I have presented loudspeaker impedance graphs over the past 3 decades I meaure with DATS but plot the data with the Audio Precision System One app.
John Atkinson
Technical Editor, Stereophile
Thank you.
On the general subject of piano recordings, I have always had a piano technician/tuner on call, to make sure the piano is in optimal condition before each session.
John Atkinson
Technical Editor, Stereophile
No problem. And as someone else posted today, switching to "desktop theme" on the iPhone works better for anything other than superficial browsing.
John Atkinson
Technical Editor, Stereophile
That was the original load designed by Ken Kantor. I modified it by adding a Zobel network - a resistor and capacitor in series - across the input terminals so that the load is now moderately demanding but not untypical. See the revised circuit diagram and impedance plot at...
An article on the making of this album will be posted on the Stereophile website the week starting April 21.
John Atkinson
Technical Editor, Stereophile/co-producer, Molto Molto