HMacFidelity

In my eBook, I say to always measure each speaker individually with a time reference. I haven't seen that video, so I don't know what he...

Not having a reference, not sure where the room is headed, but this does sound different. New Mdat. Both zero and 90 degree...

Yep, people forget that almost everything we own today is a "computer" by some regards. Even these DAC's on our desks.

Peaks and plateaus. on the ETC there are events around 20ms, 28ms and 42ms. Each followed by a downward slope and a moderate plateau...

Weekend update. Covered the center of the ceiling strapping with absorbent material. Room felt like it crossed a threshold with this...

Updated Mdat. Extended the ceiling treatment behind the listening position. Did my best to get the mic in the same spot. Not sure how a...

AI guy and I have been chatting about timing and levels after the initial ITDG event. Particularly, a post ITDG gap before the secondary...

Thanks for this suggestion. AI Guy is fun to run the measurements by.

Subjective Thought Sunday. Dac filters. Topping E30 II lite filters. Using the measurements of the filters from another thread, I...

Welcome. We meet Tuesdays. New guy brings beer.

Settings and limits. I came up with this spectrograph.

Ok, my understanding - the peak around 4-6ms fused to the direct sound. Possible tone defects. Could add some weight (reinforcement?) to...

Keith, thank you for taking the time. Really appreciate your analysis. 1. 12ftx8ft hole in the rear side boundary. Leads to other side...

I’ll just keep sharing the data, here, for my self to document the progress. Threw up some strapping and a bag of 5.5” comfortbatt in...

Oh boy, thought I was on the right track with this one. The sub, a 25 year old Sony SA-W3000. Frequency knob turned to lowest 50hz...