gnarly's latest activity

The reference line i use, is measured 2.83V sensitivity. Measured over an interval of time, typically 1 min. LEQ-Z SPL and rms...

yeppa !!! Critical distance is an irrelevant topic in this thread....heck, ROOMS are irrelevant in this thread. Sensitivity @ either...

Yes, for sure. It was easy to feel the magnetic field interactions, positioning the 3" faital's in a ring around the central single...

Your experiment gives very similar results to what I've measured with any vented DIY I've built. Port tuning, the impedance minima, has...

Hi Mitch, thanks for the reply. I think you are probably the most experienced person I know of, in terms of one who works with room...

Thanks, and yep. That's all I've done for many years, electrically. Otherwise, my 'room tuning' has just been speaker placements...

Yeppers. That's where I stand with room corrections. (I feel I have speaker building, at the anechoic level, figured out pretty well.)...

Hi, great questions imo...the ones that matter most. I think how deep, if, you get into FIR depends on what you want to do with it...

Yep, I'm sure they could be improved on...and do doubt with some issues solved.. The thing I can't see getting around, is simply how to...

I'm not about to say anything's screwed up...pretty cool analysis considering the 4 holes as little Helmholtz resonators. I've built a...

The one spec on the Tekton site for the Mini-Lore that screamed BS to me...is pain ole sensitivity. 95 dB 1W/1m .....out of a 1" dome...

I've yet to see global phase correction of an already setup speaker make a splash with anyone. Most folks revert back. Which makes...

Ime, "ring arrays" add far more problems than they eliminate. The basic problem with all cone/dome type speakers, is the difficulty in...

Welcome to the world of acoustic measurements ! :) Just wrap some foam around it....or if that's too little a fix, make a wand to mount...

Thanks ! edit: just thinking out loud.... The CSL files equal about 150 points per octave (PPO). REW Analysis section defaults to 96...