Glider95

If you don't want surprises, don't use ceramic capacitors at the low-pass filter output. Use film capacitors, for example with MKP2...

Thank you for the inputs ! After checking your document as well as the TAS5828M Evaluation board, I believe I can change the inductance...

Thank you for your feedback ! If you are referring to this strip: I believe it used for cooling of the chip itself. I forgot where I...

If you want to get distortion at the level of 0.03% per 1W, then you definitely need to use a different low-pass filter at the output of...

As per datasheet, TAS5828M should be able to output 50W stereo (100W mono) with a distortation around THD+N ≤ 0.03% at 1 W, 1 kHz. I am...

Hey @Glider95 Glad to see your project alive and kicking I am not knowledgeable enough to give you any advice on the PCB. It calls my...

Sorry @cobby , I just noticed your answer. Would you be able to give me a bit more detail on what you mean ? I am preparing to place...

Hello, Following my post in the I2S Amp thread: I have received the draft design, from a hired free-lance, to use TAS5828M and I would...

These cabinets probably leak a lot of sound / have resonances... a few mm of PLA or ABS is nowhere near 15mm MDF in overall stiffness or...

Hello, I have uploaded all the files here including the Altium project files: https://github.com/Glider95/TAS5828M--Audio-amplifier

Hello, I have received the draft design, from a hired free-lance, to use TAS5828M and I would like to get your opinion before sending...

Thank you Voodooless for your clarification, I indeed believe it was fully digital until I look more in detail. Here is the latest (I...

Hey, I am also looking for Digital amps taking I2S as inputs and which can deliver 15-20W outputs for my speakers satellites. My...

Hello, Some updates: I found the UART Communication pins and could look at some logging from the RX: There is details on the: WiFi...

Hello, Here is some update. I have received my Logic Analyzer - Cheap one that connect to USB and work with Salae software. I have...