Esuess

An update for anyone who is also experiencing the same issues of output imbalance when using HPA output (Front output: 6.3 and 4.4...

At loads of 16 Ohm or higher, the DX5 II will not clip in low gain. Single ended, maximum output at 16 Ohm is 3.3 W, which is...

Hi All, How should I check the input level? For the USB I'm using my computer and it is at 100. Using a USB C to 3.5 DAC or my...

Another update as well. Topping has replied to my email and also gave me the 1.88 firmware. It "improved" the clipping/distortions but...

Cable is all good, tested jack and there is no beeps. I also tested the connection to left and right and it seems to be right. If I'm...

Yes, I do have a multimeter. What number should I look for? Yes my crinear has a balanced 4.4 while the others i tried with both the...

At High gain it starts clipping at -30. I've tried my sisters bose quiet comforts and it still clips at -20

So this might really be a faulty unit. I'm not sure why I can't get past -20db for the front outputs. the RCA output doesn't clip my...

My Topping DX5 II (FW V1.78) is clipping and has prominent left-side bass imbalance when volume goes past -20dB. I've tested three...