Dimitrov

When you have 2 identical ones and one is connected to an external amp and you can feed both with the same signals and adjust the volume...

Thank you very much for the advice. Here I thought it wouldn't involve lab testing and it turns out, it kinda does. Well, I guess don't...

Yes, not easy to do and is why most of the 'this or that amp sounds better' reports come from. (Small) differences in loudness. Yes, to...

Stepless attenuator? This is getting too complicated. Clearly this type of test I think was not meant for the layman to do. This is more...

So basically as I understand it, in order to do this properly I need two AVR's. One without power amp connected. The other with power...

You will need a voltmeter and test signal (sine of around 400Hz) to level match as it should be within 0.1dB (1%). This should be done...

Any experienced members here that have done testing like this? Can you share your thoughts? How would I go about setting up this test...

Can you give me a rundown on how you would conduct the test? Like a step by step?

What would be the best way to set up a listening test to test for differences between let's say an AVR, and an external power amp...

Liberal use of the 'Ignore' button makes this place much better.

What has become clear over the course of this thread is that genuine back‑and‑forth communication is not really tolerated here unless it...

After I stepped back, the discussion continued for multiple pages without my participation. The idea that I’m the one responsible for...

That’s actually a clear perspective. Had you led with ‘I think audible differences between competently designed amps are negligible, so...

This actually illustrates the problem perfectly. You’re framing a simple follow‑up question—‘I acknowledged your resource, now what’s...

Yes, and they’ll continue to be discussed because gear changes, use cases differ, and people value fresh perspectives. If every question...