Dave_Reite's latest activity

You need based on my measurements: The idea is to reduce by little the value of the 5.6uF input capacitor.

Here is it.

Some more playing with this mod it looks like we can improve by increasing the woofer baffle compensation by adding 0.5mH in series with...

I design a lot of crossovers , the intended mod is to help people that have the speakers to improve them easily without a lot of work...

First the internal modification are optional and are easy to do compare for full speaker operation. Take a look at this video to...

You appear to be defensive on this. As I said above, a single resistor will accomplish the goal of reducing the tweeter level and...

Yeah, well, you were the one that mentioned possible internal modifications. :) Regardless, I don't think this particular speaker is...

If you're interested in diving into it at this level, I suggest to bin the original crossover and redesign it yourself. 'A good learning...

MY own experience with my LX521 based system is that correcting for room response (not speaker response...) below the Schroeder...

If that solution is working for you, continue to use it. I sold my 530's, but IIRC I used a 2 ohm resistor for tweeter attenuation...

Yes indeed, there's already myriad threads on this forum regarding DRC. :) Plenty of opinions. I don't have any experience with the M2...

Please repeat your measurements driving just the tweeter section and expand your vertical scale so it's much easier to see. Yeah, I...

Yep, I'm aware of the history and SL's audition of the BeoLab 90. We chatted about it via email a week or so after his audition. He...

You don't need the 50uF capacitor. Just the resistor will accomplish your goal. A 50uF series capacitor in a typical tweeter crossover...

I don't think it will. The wavelenghts are so long that the enclosure effectively does not exist for the chassis. 40hz is ~8m, 80hz is...