bsas's latest activity

I agree that shouldn't be possible. I tried to change all multiple times and it never reset it. But then, when I did a factory reset it...

This sounds like the individual channel was set to XLR + RCA which shouldn't be possible. I've measured the channel balance across my...

I’m not by the Pre90 at the moment but I do remember it being an option not listed in the instructions; that said its possible that I am...

Where? Mine has just the following options: "1. Display | M (A, L, M, H)" "2. Remote | ON (ON, OFF)" "3. Vol Memory | IN (IN, OUT)" "4...

OK, here is my story. My Pre90 was obviously 5db louder in the left side. I isolated all components and it was clearly the Pre90. When...

For starters make sure you only have one set of inputs connected on the Ares, there’s a warning about it in the manual. If the issue is...

I rotate the speakers. 1TD-X is the most regular in my system, and I might sell the KLH (I just don't like floor standers). I find that...

I have the same two speakers (KLH Model 5 and the CSS Criton 1TD-X). Which one is your favorite and why? What do you mean by “combining”...

OK, I think my Pre90 has a major issue… the left side is 5db louder than the right side. I was doing some speaker measurements and I...

One bit for every 6.02 dB of attenuation.

True… but I am never fully sure how much quality one losses with digital volume control :(

The latest firmware for the Ares II has digital volume control, if you fancy that. You can flash your current unit with it.

Oh wow, the Pre90 only has 10KΩ unbalanced in and 2KΩ balanced in? I think that's poor for a preamp, particulary when it's technically...

Purifi is fine, the problem is that it doesn't have a volume knob so in my mind I thought about the Pre90 as a volume control (the...

Looks like giants have good hearing and they die if they hear distortion... poor giants...