audiofun

only if they fixed quantization bug, and allow separate EQ per channel.

topping uses db for volume attenuation. it's definitely known.

You know exactly how much to turn down. Just do the math. (How much dbs between 4 and 5 volts). Some websites have online calculator...

Just turn down the volume. It’s very simple. You shouldn’t listen that loud either. On the other hand, studio equipments(such as studio...

i think it’s fine. XLR outputs only have 1.3uV noise so won’t cause issues. In this case higher output voltage is better.

I would wait until it's being tested. I believe it's not a hard problem to fix (just like making d50iii supporting EQ for each channel...

this is awesome. compared to their old spec (see here) they significantly improved the headphone amp noise (thus SNR). Now it's only...

there is zero evidence topping fixed it, at least for existing models. Yes it's a software issue. but unlike RME or JDS, you shouldn't...

the EQ is not implemented cleanly so it has quantization error. When EQ is on it exhibit higher noise floor around that frequency EQ is...

SMSL C200 only costs $200 and offers good balanced DAC and perfect hp amplifier. Topping DX3Pro+ costs $200 and offers good single ended...

I believe something is wrong. Topping usually pre-manufacture hundreds of devices before launch. Hifi is a small market, It's unlikely...

this is not what I am talking about. Here's what I am referring to. They were available before but topping removed them.

This is weird. I checked their chinese site and the table spec is also removed. When shenzhen audio posted the product initially last...

https://www.0db.co.kr/FREE/5178644 see the noise level for headphones output. 1.8uVrms for single ended low gain. (Topping have that...

Topping has that written (as A weighted noise) in their official spec. You don't need to wait for Amir's measurements. And the higher...