You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
-
A
Finally i fixed my lsx. My creazy idea was right. I do it like on pics and it works fine few hour in closed case
-
A
Lsx is my first and last all in one. I have also kef IQ 70 + powernode+ nordost superflatline+ woofer kef and that play awesome.
-
A
Im sure problem is too high temperature near Q211. All parts looks good. I tried use heatsink, but that was really small. First i try to...
-
A
R411 4.8kohm. i try to check temperature but i have to get temp. Meter. I have creazy idea. If in ma case problem is dc regulator (its...
-
A
Most strange thing is that - spekaer play few hour without problems but it must be like on picture
-
A
I check Q211 and pin 1-2 0.7v pin 1-3 0.7v pin 2-3 0.692v
VOltage q211
Pin 1 20v work fine 9.5v blinking
Pin 3 18.9 work fine 9v...
-
A
Z203 was dirty. I don't know what was that but now looks good. C 436 looks good too. When i check z203 there was 0.7v and 2v on other...
-
A
I'm from Poland. Input voltage is 30v. I make photo tomorrow. I just closed speaker for test. I replace small cooler on BCP 56. It plays...
-
A
Sorry for my english... I have same problem with my LSX. In service replaced L236 and C434, C435. Now i can play music about 10 minutes...
-
Loading…
-
Loading…