A

Latest activity Postings About

    • A
      alin_im replied to the thread Calibration Microphone.
      Hi all, coming back with some results from the calibration files of the Dayton Mic. Using MAB methodology, I have tried the 90 degrees...
      • 1729330239611.png
    • A
      alin_im replied to the thread Calibration Microphone.
      Understood, sounds logical. I will try what MAB said as well and maybe the guys at Spectrum Labs will send me some calibration files...
    • A
      alin_im replied to the thread Calibration Microphone.
      thank you for confirmation!
    • A
      alin_im replied to the thread Calibration Microphone.
      hi thank you for this! did you apply an offset to the values or what was your methodology of creating the 90?
    • A
      alin_im reacted to Blumlein 88's post in the thread Calibration Microphone with Like Like.
      Attached is the 90 degree cal file for the Dayton. You can compare it to a measurement you do seeing how close it is by duplicating 0...
    • A
      alin_im reacted to MAB's post in the thread Calibration Microphone with Like Like.
      It looks correct:
    • A
      alin_im replied to the thread Calibration Microphone.
      thank you much appreciated!
    • A
      alin_im reacted to Blumlein 88's post in the thread Calibration Microphone with Like Like.
      This would work and you'll know for sure. I'll adjust the OPs provided file and upload it later. Not at home right now.
    • A
      alin_im replied to the thread Calibration Microphone.
      funny enough, I was thinking to do the same thing, but I thought it might be a little too junkie to do it and I was not sure how...
    • A
      alin_im replied to the thread Calibration Microphone.
      thank you very much! attached is the calibration file provided by Dayton. how would you do it?
    • A
      alin_im replied to the thread Calibration Microphone.
      I already have one from a local distributor, not Cross spectrum unfortunately...
    • A
      alin_im replied to the thread Calibration Microphone.
      Hi all, coming back to the newbie land... The Dayton emm-6 has 1 calibration file, i suspect that is done at 0 degrees orientation...
    • A
      alin_im replied to the thread Calibration Microphone.
      So many opinions :D I made the decision to chat with audio dealer and they will send both a UMIK1 and a Dayton. Will test both and...
    • A
      alin_im replied to the thread Calibration Microphone.
      I will have a play with UMIK when it comes and see if this satisfies my requirements. As you said, I need for simple room measurements...
    • A
      alin_im replied to the thread Calibration Microphone.
      Thank you for the info. I have seen a lot of people are choosing the UMIK-1. TBH my initial thought was not going with a USB...
  • Loading…
  • Loading…
Back
Top Bottom