alanca3

Well, I suppose it is. They retail for around 80k, so a hair under half the price of the 90 at an eye watering 200k. The Beolab 20 was...

The CSA (Conic Section Array) waveguide is in fact a poor performer in vertical dispersion department. I suppose that’s the trade off...

The higher end B&O stuff really does sound good, but you’re also paying for the design. It’s part of their philosophy. They create art...

Introducing CTXMatrix plugin, a free, lightweight 64-bit VST3 plugin I developed to implement the Ambiophonics RACE (Recursive...

Not familiar with the SS200, but the optimal setup is having all speakers crossed at the same frequency if possible, and thus allowing...

@alanca3, Thank you very much for the advice and explanation. Very much appreciated. Really provides me with some interesting things to...

Above is an example of both a high and low shelf. Below is the default MultiEQ target. Notice how it is flat until about 5khz, where...

Do not use the midrange compensation dip. Many speakers have a dip in their power response near the crossover frequency, typically in...