That the A90 will look and stack better with the D90. In addition to be a good preamp if needed...What is your opinion???
I have hd 650 and Genelec 8330 and 7350.That the A90 will look and stack better with the D90. In addition to be a good preamp if needed...
Both will sound the same at the end. I see no headphones around that would need the 5.5W out of the A30Pro.
Then if you happen to need a preamp feature for your Gens: the A30 cannot do the trick.I have hd 650 and Genelec 8330 and 7350.
This is my sound system.
XLR cables I guess.Good morning. What exactly cables do I need to connect the topping D90se together with the topping A30 Pro ???
and my genelec speakers that output xlr that I will connect ???XLR cables I guess.
It would be helpful if you could specify what you're trying to connect. These cryptic messages don't help anyone, because we unfortunately can't read your mind.and my genelec speakers that output xlr that I will connect ???
Sound quality is the same, but the A30pro gets much warmer than the A90 in my experience.What is your opinion???
and my genelec speakers that output xlr that I will connect ???
if i use the xlr from the topping d90se on the 7350, how will i connect the a 30 Pro to the d90se ??? So what I am asking is how I will connect the d90se and the A30 pro together.You connect analog out left and right channel from your DAC to your Genelec 7350A subwoofer. The 8330A is then connected to the 7350A.
Setup is described in the 7350A manual
https://assets.ctfassets.net/4zjnzn...d1daf1e76cde6ac242e8e5/genelec_7350_opman.pdf
To make use of all the features of your Genelecs, including room calibration, you need to buy the GLM Kit. Highly recommended. You don’t need to have the kit connected after calibration.
GLM Calibration Kit - Genelec.com
The Genelec GLM Calibration Kit enables Smart Active Monitors and Subwoofers (SAM™) to work with Genelec Loudspeaker Manager (GLM™), our award-winning monitoring calibration and management software offering precise automatic room adaption, advanced system control and highly detailed GRADE Room...www.genelec.com
You have to connect the D90SE to the A30 Pro via XLR and the A30 Pro via TRS>XLR to your speakers.if i use the xlr from the topping d90se on the 7350, how will i connect the a 30 Pro to the d90se ??? So what I am asking is how I will connect the d90se and the A30 pro together.
So fine. I will connect the d90se to the A30pro via XLR and my speakers on the D90se via the AES / EBU port.Ah, the D90SE has AES output (from inspecting the back of it in the review) so you can use that to connect the 7350 and then to one 8330, and from that 8330 to the other 8330. Using the digital input/output.
I assume that the d90se can adjust the volume digitally or you’ll have to get the GLM Kit to do so (a bummer if so).
That would work to.You have to connect the D90SE to the A30 Pro via XLR and the A30 Pro via TRS>XLR to your speakers.
Have you even checked the A30 Pro's spec sheet?
I think I’m wrong about s90se having AES output, it only has digital devices to input.So fine. I will connect the d90se to the A30pro via XLR and my speakers on the D90se via the AES / EBU port.
Thanks very much.
Even if the D90SE had that digital output, using it would mean the DAC in the speakers would be doing the work, rendering the D90SE completely pointless.Edit: The D90SE does not have AES output.
Ah, the D90SE has AES output (from inspecting the back of it in the review) so you can use that to connect the 7350 and then to one 8330, and from that 8330 to the other 8330. Using the digital input/output.
I assume that the d90se can adjust the volume digitally or you’ll have to get the GLM Kit to do so (a bummer if so).