mt196
Active Member
The quality won't be the same toughInstead of D10 you can use USB to SPDIF converter.
https://www.google.com/search?q=usb...WQfFAKHQOQDTQQ_AUoAXoECAsQAw&biw=1348&bih=982
The quality won't be the same toughInstead of D10 you can use USB to SPDIF converter.
https://www.google.com/search?q=usb...WQfFAKHQOQDTQQ_AUoAXoECAsQAw&biw=1348&bih=982
This is perhaps the most dangerous audio forum of all. Yes, I’ve just ordered one of those things. And yes, you folk made me do it.
Heh... I’m one of those “middle of the road” people whose final choice comes down to my personal likes/ idiosyncrasies. But, and this is a big but, any piece of gear I spend money on needs to measure at least acceptably. And If I decide to spend say over a grand or more, the measured performance better be excellent.LOL ....at least for over 90% of the time, recommendations here come from a basis grounded in science and measurements. Not airy-fairy plucked out of thin air euphoria as with lots of other audio forums !
Hello again.
I threw myself to a d50pro topping. But I see that it has no power supply included. Do you necessarily need 5v with 1 a ... or does 5v2a work?
I have lately had some dropouts between ASUS360 WIN10 laptop and (USB) D50S when using Tidal. Music just stops but time runs in Tidal app.
Tidal log gives "AUDCLNT_E_BUFFER_SIZE_ERROR"
I have tried adjusting buffer size from Topping win10 interface and made a factory reset for D50s. No help so far, any ideas ?
Thanks
Since the details of your use environment are unknown, we cannot give any useful advice.I have lately had some dropouts between ASUS360 WIN10 laptop and (USB) D50S when using Tidal. Music just stops but time runs in Tidal app.
Tidal log gives "AUDCLNT_E_BUFFER_SIZE_ERROR"
I have tried adjusting buffer size from Topping win10 interface and made a factory reset for D50s. No help so far, any ideas ?
Thanks
If you want an all in one with a headphone amp you probably know the answer. The smsl also got xlr out and MQA. The Topping is probably(!) more reliable though.Just asking, this or smsl m500? Great Review!!!!!!!
Marketing :/Why those new members prefer lossy (and pretty bad) mqa? Is a mystery or what?
In my case, I'm just interested in new technology.Why those new members prefer lossy (and pretty bad) mqa? Is a mystery or what?
Yes, you can play it.Hi i own Topping d50s and i have installed official drivers, foobar2000 and plugins.
When I set the output (foobar2000->preferences->tools->sacd->output mode: dsd) no sound.
When I set the output (foobar2000->preferences->tools->sacd->output mode: pcm) there is a sound. Topping control panel -> asio status -> ASIO Active (PCM mode). Is it possible to start the sound with dsd output(foobar2000->preferences->tools->sacd->output mode: dsd)?
I think the power rating is up to the device if I'm not mistaken. So 5v 2A should be fine as the device will only draw what current it needs form the power supply. Perhaps someone can correct me if that is not correct, but from what I can remember the current rating is more of what it can handle rather than what it actually outputs.