The HPA-1 circuit boards have arrived from the assembly house. The first one will be in a prototype chassis and underway to Amir for review and measurements within the next hour or two. The only difference between the prototype chassis and the final chassis is that the final will be anodized after machining, whereas the prototype chassis was anodized before machining. Basically, this means all metal surfaces will be black in the final version whereas the prototype shows raw aluminum around the RCA connectors and inside the various cutouts.
Electrically the sample Amir will receive is identical to the final revision.
I will need to hang onto the sample after Amir is done with it, unfortunately. I need the demo version around for the various remaining tasks, including:
Tom
Electrically the sample Amir will receive is identical to the final revision.
I will need to hang onto the sample after Amir is done with it, unfortunately. I need the demo version around for the various remaining tasks, including:
- Getting a Performance Measurements tab going on the HPA-1 product page.
- Getting foam inserts for the shipping box manufactured.
- Other sundry tasks (like preparing for the Florida Audio Expo in February).
Tom