Hello everyone, I want to ask for some help with my REW skills and im quite interested in your opinions!
First of all here is my room! (ye i know its kinda scuffed up and needs some paint and all that but that is not my priority right now )
The bed and the furniture on the sidewall will be gone soon but for now im stuck with this.
Those absorbers are DIY made of Rockwool 100cm x 60cm x 8cm
Skyline difusers are also DIY made to those specs
In total i have 15 made 6 of those are in a 3x2 array on the front wall and in a 3x3 on the back wall.
The rooms dimensions are: 370cm x 330cm x 254cm or 12ft x 11ft x 8ft
Speakers are set up at the long wall.
Speakers themselves are 135cm away from each other and are 30° tilted.
Gear:
JBL LSR 305 1. gen
JBL LSR 310 sub
Focusrite 2i2 1. gen
measuring mic: Sonarworks XREF 20
Those are my measurements 2 meters away from the front wall. (yes i know this is further than the isosceles triangle rule says but im still playing with the sitting distance and tilt) Ive measured various distances from 80cm to 200cm and found that 200cm is the best starting point.
Green line represents no EQ. 1/12 smoothing
Mic and Soundcard calibration files have been used.
After playing for quite some time with EQ´s and auto EQ´s from REW im still far away from my goals and this purple line feels like it lacks bass.
Ive just cut the peaks and didnt boost anything with the EQ that is applied here.
Since ive bought the Sonarworks mic i had a Sonarworks Reference trial and honestly i didn't fully like the results either.
Are there any tricks you guys could tell me and help me out or am i doomed with this sound curve^^
Would this freq curve be acceptable for you or are you disgusted with it?
Im also playing with the idea of buying a Genelec setup with 8351 and possibly two subs and just use their GLM system and be done but still i dont want to spend the money (around 12k €) and love to make the best of what i have now.
First of all here is my room! (ye i know its kinda scuffed up and needs some paint and all that but that is not my priority right now )
The bed and the furniture on the sidewall will be gone soon but for now im stuck with this.
Those absorbers are DIY made of Rockwool 100cm x 60cm x 8cm
Skyline difusers are also DIY made to those specs
In total i have 15 made 6 of those are in a 3x2 array on the front wall and in a 3x3 on the back wall.
The rooms dimensions are: 370cm x 330cm x 254cm or 12ft x 11ft x 8ft
Speakers are set up at the long wall.
Speakers themselves are 135cm away from each other and are 30° tilted.
Gear:
JBL LSR 305 1. gen
JBL LSR 310 sub
Focusrite 2i2 1. gen
measuring mic: Sonarworks XREF 20
Those are my measurements 2 meters away from the front wall. (yes i know this is further than the isosceles triangle rule says but im still playing with the sitting distance and tilt) Ive measured various distances from 80cm to 200cm and found that 200cm is the best starting point.
Green line represents no EQ. 1/12 smoothing
Mic and Soundcard calibration files have been used.
After playing for quite some time with EQ´s and auto EQ´s from REW im still far away from my goals and this purple line feels like it lacks bass.
Ive just cut the peaks and didnt boost anything with the EQ that is applied here.
Since ive bought the Sonarworks mic i had a Sonarworks Reference trial and honestly i didn't fully like the results either.
Are there any tricks you guys could tell me and help me out or am i doomed with this sound curve^^
Would this freq curve be acceptable for you or are you disgusted with it?
Im also playing with the idea of buying a Genelec setup with 8351 and possibly two subs and just use their GLM system and be done but still i dont want to spend the money (around 12k €) and love to make the best of what i have now.